|
| |
|
| |
KDV Series
DRY RUN & VERTICAL PUMP (IN-TANK TYPE) |
|
| |
 |
Features:
- Dry vapor seal can ensure to avoid motors and bearings from being etched by chemical gas. While a pump is operating, chemical gas through pores between the extended boards and the frame of motor is exhausted.
- Because of the C-Clip, it can prevent the impeller from moving and loosing during the operation.
- The in-outlet of pump can be extended so that it becomes more convenient to draw the chemical solution from a tank.
- Pumps are produced with standardized models and the materials of pump body are chosen depending on the mechanical solution (FRPP, CFRPP, CPVC and PVDF). The weight of pump compares with others in the market is lighter. Moreover, it is assembled easily and safely.
- With highly effective aluminum motor and insulation class F, vertical pumps apply in normal situation and all kinds of environments.
- Pumps can be operated in dry running without water..
|
| MODEL |
No |
Outlet (mm) |
Flow (L/min) |
Head (M) |
Power (Kw) |
| KDV-32VK-0.5 |
A |
32 |
100 |
7 |
0.55 |
| KDV-32VK-1 |
B |
32 |
100 |
12.5 |
0.75 |
| KDV-32VK-2 |
C |
32 |
200 |
15 |
1.5 |
| KDV-40VK-3 |
D |
40 |
200 |
20.5 |
2.2 |
| KDV-40VK-4 |
E |
40 |
250 |
24 |
3 |
| KDV-40VK-5 |
F |
40 |
300 |
28.5 |
3.75 |
| KDV-50VK-7.5 |
G |
50 |
400 |
28 |
5.5 |
| KDV-50VK-10 |
H |
550 |
400 |
38 |
7.5 |
| 1. MODEL : KDV |
| 2. OUTLET : 32-1.25" 40-1.5" 50-2" |
| 3. SPECIFIC WEIGHT : VK-1.1 |
| 4. POWER : 0.5, 1, 2, 3, 4, 5, 7.5, 10HP |
| 5. FREQUENCY : 5-50HZ |
| 6. RUBBER : N-NBR E-EPDM V-VITON |
| 7. MATERIAL : F-FRPP C-CFRPP A-CPVC P-PVDF |
|
KDV Performance Curve Chart
 |
|
|
